Multi Hand Tools Set

Description

1.flat-head pliers

2.Nut Plier

3.Soft Wire cutter

4.,Cutting hole for Hard Wire

5.Safety

6.wire bonding hole

7.7# Slotted screwdriver

8.3# Slotted screwdriver

9.Can opener

10.wire stripper

11.Scissors

12.serrated knife

13.File

14.Knife

15.Screw sleeve

16.File Saw interface

17.Ruler

18.Safety

19:T11D Saw

20.T11C Saw

21:Screwdriver Bit

Screwdriver Type:

1.PH1+PH2

2.SP8+SP4

3.TT25+TT20

4.TT15+TT10

5.SL6+SL5

6.SL4+SL3

7.H5+H4

8.H2.5

Plier head:3Cr13 hardness:HRC51-55
Handle:2Cr13 Hardness: HRC46-48,
Knife:7Cr17, hardness:HRC55-58;
Tooth knife (cutting knife):3Cr13, Hardness :HRC52-54;
File:3Cr13 hardness: HRC52-54;
Saw:3Cr13, hardneses:HRC52-54;
Scissors:3Cr13 Hardness:HRC52-54;
Opener:3Cr13 Hardness:HRC52-54;
Needle:3Cr13 hardness:HRC50-53;
screwdriver bit:3Cr13 Hardness:HRC50-53;
Bit:33mm Model：SP8+SP4/TT25+TT20/TT15+TT10/SL6+SL5/SL4+SL3/H5+H4/H3+H2.5
Saw parts:58CR4,
The maximal twisting force: 130KG
Use environment:

1.if you use it in a wet or High Salinity and alkalinity environment,

a.wash it by pure water

b.wipe it by cloth

c.add oil on it

2.if there have stickiness things for some time,you have to clear it by water or detergent at once

3.Clear the tools Oil residue and so on ,,Kindly Use turpentine or mineral oil,forbid to use detergent with chlorine.

4.After cleaning,wipe your tools,add some light oil(such as WD-40 ),so that we can clear the wet and moisture off from Joint.

then the tool will not corrupted..

How to sharpen a knife.

1.STRAIGHT KNIFE,USe standard device to sharpen it(grindstone, grindstone and so on ) .

2.serrated knife,you have to use special tools for it,sharpen it by right ways ,can keep serration curvature.Important!!,

Just sharpen the front teeth,,don’t the back size ,will lead to reduce the knife Function!!!!